EXP 8000 & EXP 12000
The EXP 8000 is a high speed double sided exposure machine mainly designed for industrial production and equipped with two 4000 W mercury halide lamps. These lamps in about 900 mm distance from the PCB ensure almost parallel light.
Operation:
EXP 8000 guarantees a perfect exposure within a minimum of time and energy consumption by two UV sensors. The required exposure energy is preset on a keyboard and shown on a digital readout. The two intelligent UV-light emission controllers (one per side) automatically measure the energy supplied per side and stop the exposure at preset energy amounts. A vacuum pump provides a close and uniform contact between artwork and board. The exposure cycle starts when the drawer is pushed in. At that moment the lamp shutters are opened and the lamp’s power supply is increased from stand-by to full power. In stand-by mode, the energy is reduced to 25% in order to save energy and avoid heat problems. The machines have powerful cooling fans. When the exposure is finished the vacuum is stopped.
Features:
- Max. Working area 600 mm x 600 mm (recommended: 400 mm x 500 mm)
- Microprocessor controlled UV-light emission
- Vacuum assisted drawer
- Suitable for fine line PCBs
- Suitable for exposure and curing of solder mask.
- Built-in yellow light table
Technical data:
Power supply: 380 V, 50 Hz triple phase
L1/L2/L3: 8 A/19 A/10 A
Fuse: 32 A pro Phase
Dimensions (LxWxH): 820 x 1800 x 1950 mm
Weight: approx. 270 kg
Construction:
Sturdy, welded tube frame with coated sheet plates. The chassis consists of a sliding drawer system and a yellow light table in the machine’s front.
