RBM 402 F

RBM 402 F

The RBM 402 series is the highest highest developed brushing machine in our range. It is ideally suited for professional prototyping or small batch production in modern PCB laboratories. The machines perform double side operation. Upper and lower brushing rollers are adjustable in pressure and have a digital read-out. Oscillation and transport speed are variable. The wet procession system comes together with a powerful squeeze + hot-air dryer. The standard version KF - has a closed loop rinsing system with integrated rinse water tank, filter and pump unit. This saves the user money for fresh water and headaches about how to meet waste water regulations. On request we offer version F with external water supply. The "F" is indicating an integral, automatic filter system. That is urgently recommended in order to comply with German and European waste water pollution directives. These "F" machines are equipped with a 100 m filter tape (5 µm) and a waste water level control. As the tape load of filtered particles increases, the sensor will automatically start the filter transport, so that fresh filter tape is supplied. The last version of the RBM 402 is the BLC model. This is a simple benchtop machine with external water supply and no filter unit.

Features:

• simple brush exchange via quick change device

• precise parallel brush adjustment with hand wheel

• Oscillation and transport are stepless adjustable

• Digital read out for board thickness and power consumption of the brush motor

• Upper and lower brushing rollers are adjustable in pressure and have a digital read-out for the settings.

• The wet-processing system comes together with a powerful squeeze + hot-air dryer.

• The „KF“ is indicating an integral closed loop rinsing system. That is urgently recommended in order to comply with German and European waste water regulations.

Technical data:

Working width: 400 mm Board thickness (rigid boards only): 0.3 - 5mm Board sizes min.: 80 x 175 mm recommended, 80 x 120 mm possible Board sizes max.: 400 mm x endless Brushing speed: 1360 rpm Conveyor speed: 0.2 - 2 m/min Oscillation stroke: 10 mm Oscillation frequency: 10 - 110 l/min Brushing stroke on upper roller: max. 20 mm Brushing stroke on lower roller: max. 15 mm Feed per turn of hand wheel: 0.266 mm Brushing roller length: 410 mm Brushing roller outside diameter: 89 - 91 mm Brushing roller inner diameter: 35 mm Rinsing system water inlet: 20 mm (version F/BLC) Rinsing system water outlet: 40 mm (version F/BLC) Rinsing system pressure max.: 1.5 bar (version F/BLC) Rinsing system water consumption: 26 l/min. (version F/BLC) Rinsing system water consumption: 0 l/min. (version KF) Power supply: 220 V, 50 Hz, max. 12 A Dimensions (LxWxH): 1110 x 750 x 1160 mm Weight: 220 kg (RBM 402KF) / 170 kg (RBM 402 BLC)