IONEX A (KA) / B (KB)
The name IONEX stands for ION-EXchanger, which is the very heart of this modern waste water treatment system. The Ionex is a modern and compact plant to treat rinsing water coming form the etching or through-hole-plating machines of a pcb laboratory. We offer 4 basic variants, which differ in rinsing water through-put and ion capacity. Type A and B are equipped with a cotton pre-filter, two cation columns and a ph neutralization column. Type KA and KB have three ion exchange columns.
The cation columns color red, when loaded with ferric ions and blue/green, when loaded with copper ions. Loading of anion column can be testet by measuring the conductance of the cleaned water. Loaded columns can be sent to Bungard for regeneration or we support you to do the regeneration yourself. The drain water quality from this system is in accordance to German directives, which are of the highest standards world wide!
- For post-treatment of etching and galvanic rinsing water
- Removal of solids and all heavy metals
- closed water cycle possible (K-versions)
- Decrease of chemical oxygen demand
- Integrated storage sump with capacity of 110 l (A/KA) or 220 l (B/KB) for collecting rinsing water
- Strong built-in hose pump
- Integrated cotton fi lter candle 10 μm (active carbon filter with K-versions)
- Significant change of color when loaded with metals
- Lower and upper sump level control switch
- Easy handling and operation
- Regeneration of ion exchange resins by supplier or by user at little cost
- IONEX A and B perform additionally PH neutralization and discharge to the drain
