Electronics Products

The EXP 8000 is a high speed double sided exposure machine mainly designed for industrial production and equipped with two 4000 W mercury halide lamps. These lamps in about 900 mm distance from the PCB ensure almost parallel light.

Operation:

Features:

• Max. Working area 600 mm x 600 mm (recommended: 400 mm x 500 mm)
• Microprocessor controlled UV-light emission
• Vacuum assisted drawer
• Suitable for fine line PCBs
• Suitable for exposure and curing of solder mask.
• Built-in yellow light table

Technical data:

Construction:

Hand-operated machine, especially for mechanical through-hole-plating purposes. Professional through-hole-platings by individual tools for each rivet diameter. Optimal contacts, even without soldering. Favorit offers high quality results at a low cost level. Easy-handling and high-quality lever press also for jewelry and light punching applications, Made in Germany.

Special features:

• Adjustable depth limiter
• Maximum board size: 400 mm

Extend of delivery:

• The offered system includes complete press + tools
• Inclusive 1 x 1000 rivets
• Inclusive 1 set of tools
• Various tools and rivets are available
• Please specify the inner diameter you require
• Different tools have to be used for different diameters

Options:

• Various tools and rivets are available.
• Different tools have to be used for different diameters.
• Rivet inner diameter/mm: 0.4, 0.6, 0.8, 1.0, 1.2, 1.5
• Required drill diameter/mm: 0.6, 0.8, 1.0, 1.5, 1.7, 2.0

Technical data:

Filmstar-Plus is the name of the next generation of our bitmap photoplotter series. Optimized for inhouse production of high end film layouts at reasonable price level the system can directly proceed (extended) Gerber files (RS 274X or RS 274C) or b/w bitmap (.bmp) files. NFilmstar, your nicely designed partner in cost effective production of your required film artworks.

Technical data:

Graphical resolution:

• Finest point/Finest line = 5 um (0.005 mm/0.19685 mil)
• Finest space between 2 lines = 10 um (0.01 mm/0.3937 mil)
• Finest space between 2 areas = 18 um (0.018 mm/0.70866 mil)
• Finest inverse spot dia (transparent point in black area) = 25 um (0.025 mm/0.98425 mil)

Features:

• precise edge definition in photo quality

• perfect blackness results in perfect opacity

• extended software package included in delivery

Description:

• The film is fixed on a rotating drum. A highly focused red light laser diode is moving step-wise alongside that drum, driven by a precise stepper motor with worm and gear drive. Of course, all settings are software adjustable, calibrated and controlled.

• Data are either transferred via USB cable from your computer to the plotter or you directly read them in from any USB stick. Software is part of delivery. It allows panelization of layout and drill data, rework of aperture tables and contains functions like negative plot, mirroring, preview and drill data export.

• Interactive, absolute or relative positioning of the layouts on the film.
• Preview and rework of various aperture tables of different layout systems.

Precision vacuum exposure unit for double-sided contact exposure of photocoated base material, print films and more.

Applications:

Features:

• 2 x 6 superactinic UV-tubes, each 18 W

• Special reflectors for minimum undercut

• Analogue light emission display

• Lower exposure surface from 8 mm special glass

• Upper exposure area from structured mylar foil in a sturdy frame

• Working area 570 x 300 mm

• Suitable for fine-line PCBs

• Maintenance free vacuum (>60%) with gauge display, 1380 l/hour continuous rating

• Digital timer 1 second - 9 min 59 sec. with count-down, auto-reset and beeper

• Built in cooling fan allows long time exposure or baking processes

• Separate choice of upper/low exposure possible

• Sturdy steel housing

Dimensions:

The name IONEX stands for ION-EXchanger, which is the very heart of this modern waste water treatment system. The Ionex is a modern and compact plant to treat rinsing water coming form the etching or through-hole-plating machines of a pcb laboratory. We offer 4 basic variants, which differ in rinsing water through-put and ion capacity. Type A and B are equipped with a cotton pre-filter, two cation columns and a PH neutralization column. Type KA and KB have three ion exchange columns.The cation columns color red, when loaded with ferric ions and blue/green, when loaded with copper ions. Loading of anion column can be tested by measuring the conductance of the cleaned water. Loaded columns can be sent to Bungard for regeneration or we support you to do the regeneration yourself. The drain water quality from this system is in accordance to German directives, which are of the highest standards world wide!

Features:

• For post-treatment of etching and galvanic rinsing water

• Removal of solids and all heavy metals

• closed water cycle possible (K-versions)

• Decrease of chemical oxygen demand

• Integrated storage sump with capacity of 110 l (A/KA) or 220 l (B/KB) for collecting rinsing water

• Strong built-in hose pump

• Integrated cotton filter candle 10 μm (active carbon filter with K-versions)

• Significant change of color when loaded with metals

• Lower and upper sump level control switch

• Easy handling and operation

• Regeneration of ion exchange resins by supplier or by user at little cost

• IONEX A and B perform additionally PH neutralization and discharge to the drain

Powerful spray etching or spray developing machine mainly designed for use in pcb labs. Capacity up to 3m²/h possible (single-sided, positive material).

Features:

• Maintenance free system with self-cleaning nozzles

• Etching speed of 35μm Cu within 90 seconds (warm Fe-III-Cl)

• Line resolution better than 0.1 mm

• Big lid for easy loading, with built-in security switch

• Recommended board size: 300 x 400 mm (Maximum 350 x 450 mm)

• Small PCBs can be fi xed on carrier with adjustable holder

• Easy and clean handling by hinge free lid and handle outside of machine

• If you turn the carrier you can etch double sided

• Overfl ow wash tank in the front for rinsing etched boards

• Digital timer with countdown, auto-reset and beeper

• Sturdy construction fully made of PVC and titanium

• Suitable for all common etchants. Also well suited for spray developing of dry film resist (anti-foam agent recommended)

• Strong 1000 W heater with thermostat and over-heat fuse

• 3 cog valves (etching tank, rinse overflow, rinse inlet)

Technical data:

Ne-Cut was developed for cutting of PCBs (0-3 mm), Aluminum (0-2mm), steel (0-1 mm), plastics (0-5 mm) and even films and artworks.

Features:

• Cutting width max. 530 mm

• Two knifes made of hardened and ground steel

• Spring loaded built-in clamping unit in the front

• Transparent cover hood for user safety and visual control

• Metric edge scales in the front

• Fully adjustable back stop with metric scale for batch work (0...300 mm)

• Smallest cutting size (front) 45 mm

• Durable full steel construction

• All important parts angular adjustable

• Simple exchange of blades

• Adjustable cutting angle

• Adjustable clearance

Technical data:

A professional brushing machine designed for use in small series production and laboratories. High quality wet-processing brushing machines for PCB production at low price are possible! The proof is the Bungard RBM 300. The smaller sister of our RBM 402 is reduced wherever possible but not at quality, endurance and high precision details.

Features:

• The RBM 300 has an oscillating brush with quick change device

• Oscillation frequency and transport speed are stepless variable

• Parallel height adjustment. In contrary to the single sided height adjustment, you will achieve a long term even brushing result only with double sided parallel height adjustment.

• Machine is equipped with a finishing brush used before laminating. Various brushes available.

• Working width 300 mm

• Despite its small size, the RBM 300 has a full scale squeeze-off and hot air drying compartment

• As bench top model the RBM 300 has no integrated water treatment. A closed loop rinsing tank is available as an option

• Single side action

• Aluminium, PVC, Stainless Steel construction

• Transparent top lid with security switch

• Mechanical drying by squeezing rollers

Technical data:

The RBM 402 series is the highest highest developed brushing machine in our range. It is ideally suited for professional prototyping or small batch production in modern PCB laboratories. The machines perform double side operation. Upper and lower brushing rollers are adjustable in pressure and have a digital read-out. Oscillation and transport speed are variable. The wet procession system comes together with a powerful squeeze + hot-air dryer. The standard version KF - has a closed loop rinsing system with integrated rinse water tank, filter and pump unit. This saves the user money for fresh water and headaches about how to meet waste water regulations. On request we offer version F with external water supply. The "F" is indicating an integral, automatic filter system. That is urgently recommended in order to comply with German and European waste water pollution directives. These "F" machines are equipped with a 100 m filter tape (5 µm) and a waste water level control. As the tape load of filtered particles increases, the sensor will automatically start the filter transport, so that fresh filter tape is supplied. The last version of the RBM 402 is the BLC model. This is a simple benchtop machine with external water supply and no filter unit.

Features:

• simple brush exchange via quick change device

• precise parallel brush adjustment with hand wheel

• Oscillation and transport are stepless adjustable

• Digital read out for board thickness and power consumption of the brush motor

• Upper and lower brushing rollers are adjustable in pressure and have a digital read-out for the settings.

• The wet-processing system comes together with a powerful squeeze + hot-air dryer.

• The „KF“ is indicating an integral closed loop rinsing system. That is urgently recommended in order to comply with German and European waste water regulations.

Technical data:

The RDC 15 is a machine designed for laboratory dip coating of modern liquid photoresist. Today a more and more popular application is the so called: „sol-gel-application“. This machine was developed to meet the demand of a greater variety of speeds, iterations, dipping and drip off times and heavier workpieces.

Features:

• Lift bar for several workpiece fittings. The dipping height and the sizes of the aluminium profiles can be easily adapted to even dip-coat bulky items.

• The insertion and the drawing or coating speed is separately adjustable from 30 mm/min until 7200 mm/min.

• The dipping time as well as the drip-off-time (pause time up and down) is separately adjustable from 1 s up to 99h : 59min : 59s.This enables the machine not only to coat but to precisely develop. This is of great importance with certain photo coatings of the miniature etching technology.

• Up to 8 iterations are possible.

• The working range of the lift bar can be adjusted via the control panel. The maximum size of the workpiece is therefore only limited by the maximum lift range of the machine and the size of your cuvette.

Technical data: