RMP 210 – Multilayer Press
This high performance multilayer press was designed for PCB labs to enable quick prototyping of multilayer PCBs according to industry standards.
HNumber of layers is only limited by the maximum lift of the press plates (38 mm). Using separating metal sheets one can press a couple of boards over each other at the same time.
A compact and floor standing aluminum rack contains all parts of the unit including pressure supply, press plates and heaters.
The large loading door allows quick and easy access to the press chamber and is of course security switch protected.
A compressor, which is an integral part of RMP 210 / RMP 3545 is stored in the back of the machine.
In the front, you will find additional storage room for tools or boards (lower door).
The unit is controlled by two digital and adjustable thermostats, one digital timer as well as a pressure valve with a pressure meter.
Four strong air ventilators are activated automatically during cooling cycle.
Features:
Steps of multilayer production:
- Boards are pinned and stack is inserted into press plates.
- Press procedure at preset temperature.
- Cooling down under pressure.
- PCB stack is taken out of the machine.
The entire sequence will take approx. 3 hours if you start at 20°C and take out the PCBs at a temperature of 30°C. If you take up protective measures, you can remove the boards at higher temperatures and insert a new stack. This way the press cycle reduces to approx. 45 min. Gross size of the PCBs is 250 x 350 mm (or 350 x 450 mm) which corresponds to a PCB net size of 210 x 300 mm (or 300 x400 mm).
To register the layers of your multilayer you can use the register hole function of our software IsoCam and the Bungard Favorit fixes the layers with rivets.
Vacuum options:
Board size: gross 250 x 350 mm, net approx. 210 x 300 mm
Vacuum: approx. -0.7 bar
Temperature: up to 250°C free adjustabler (max 300°C as an option)
Cooling down: approx. 120 min.
Dimension press plates: approx. 401 x 320,5 mm
Weight: approx. 8 kg press plates, approx. 2 kg vacuum unit
Power supply: 230 V 50 Hz 100 W
Technical data:
Board size: brutto: 250 x 350 mm, netto: 210 x 300 mm
Pressure: > 12 t
Temperature: up to 250°C free adjustabler (max 300°C as an option)
Heating up: approx.30 min.
Pressure time: approx. 60 min.
Cooling down: approx. 120 min.
Weight: approx. 130 kg
Power supply: 230 V~, 50 Hz, 16 A
Dimensions (BxWxH): 650 x 650 x 1390 mm
