Saudi Arabia
  • Address

    Saudi Arabia 
Riyadh 
2251 King Abdullah Bin Abdulaziz Road , Al Worood district, Riyadh 12253

  • Phone

    00 966 11 205 5885

Egypt
  • Address

    3/68 Al-Mehwar Al-Markazy, Central Axis, 6 th of October City, Giza Governorate

  • Phone

    02 36858439

DUBAI
  • Address

    204 RKM building, Hor Al-Anz East, Dubai, UAE

  • Phone

    00 971 4 269 7337

  • Fax

    00 971 4 269 8668

Splash Center – Spray Etching Machine

Splash Center – Spray Etching Machine

Splash Center – Spray Etching Machine

Laboratory etching machine with static and spray rinse, integrated developer tank, a reserve tank for e.g. chemical tinning and a squeeze dryer. The Splash-Center is suitable for double-sided PCBs. Special emphasis was put on ergonomical and clean etching and rinsing as well as on low chemical drag out. A typical workflow for example is to use tank 1 (spray compartment) for etching, tank 2 and 3 for rinsing, tank 4 (with centrifugal pump) for developing and tank 5 for tinning.

Etching Compartment:

  • Maintenance free etching system with solid stream nozzles
  • Etching speed of 35 µm Cu within 90 seconds (warm Fe-III-Cl).
  • Big window to the etching chamber made from transparent PVC.
  • Maximum board size: 210 x 300 mm /Splash-Center XL: 300 x 400
  • Line resolution better than 0.1 mm (100 µm)
  • Suitable for all common etchants. Fe-III-Cl recommended
  • Lid to the etching chamber with safety switch
  • Removable board holder made from Titanium and PVC. Can be locked in drip-off position
  • Easy access to the etching chamber.
  • Strong 1000 W Quartz heater, etching temperature controlled by thermostat
  • Overheat fuse
  • Digital timer with countdown, auto reset and beeper
  • Integrated rinsing zone with drip off holder.
  • 5 ball valves for all tanks
  • Suitable for spray developing

Developer and rinse compartment:

  • Magnetic centrifugal pump to revolve developer
  • two integrated static rinses, one can be used for neutralization purposes
  • Fresh water spray zone activated by foot switch, including splash protection
  • A reserve tank, e.g. for immersion tin

Features:

  • 5 ball valves to drain all tanks, cover protected from the front side.
  • All tanks with lids
  • Integrated drip tray for all tanks, sure-footed about 120 mm above the ground
  • Integrated mechanical squeeze dryer

Technical data:

Power supply: 220 V~, 50 Hz, approx. 1,5 kW Dimensions (LxWxH): 1000 x 670 x 1200 mm Working Level: 900 mm Etchingformat: 210 x 300 mm Tank capacity: 1 x 23 L + 1 x 12 L + 3 x 8 L Weight: approx. 46 kg