Laser Products

Alu laser is an extraordinary aluminum that uses the heat of the laser to mark rather than etch. Correctly imaged Alu laser results in rich black positive graphics that feel smooth to the touch.  Alu laser enables you to create high contrast, easy to read graphics with superior resolution 

Format:

10″ x 12″

12″ x 20″

20″ x 24″

Thickness:

.005″

.020″ with adhesive 

.020″ without adhesive

Expand the capabilities of your laser engraver by adding the ability to mark metals such as stainless steel, tool steel, titanium, and chrome.
Available as a tape product, spray can or in 250g and 500g containers, the CerMark solution coats the metal easily and produces a black mark after engraving.
CerMark Metal Marking Solution is compatible with all CO2 laser engraving systems and provides a cost-effective method to metal marking applications. Visit our Tech Tips and click on CerMark Process for information on how to use the solution, spray or tape – you need at least a 40-watt laser to use the CerMark Tape.

Mark metal with three colors now available in Black, Pearl White and Bright Copper!
The Pearl White and Bright Copper colors expand the applications for metal marking and work in much the same way as the well-known Black color. These two very special compounds require spraying onto the metal using an airbrush, small cup sprayer or the XUS 007 – Spray Tool Kit. The metallic nature of the Pearl White and Bright Copper will not allow them to be brushed on.

The Pearl White color gives excellent contrast with dark metals such as Parkerized steel used on gun parts. The Bright Copper color has a metallic finish that sparkles and adds flair.
These metal marking compounds are compatible with Co2, YaG, and Fiber lasers and produce high contrast marks on a wide range of metals including stainless steel, aircraft grade aluminum, chrome and many more.

Expand the capabilities of your laser engraver by adding the ability to mark tile and glass. CerMark solution coats the tile or glass easily and produces a black, blue, or bronze mark after engraving.
CerMark Tile and Glass Solution is compatible with all Co2 laser engraving systems and provides a cost-effective method to tile and glass marking applications. Visit our Tech Tips and click on CerMark Process for more information on how to use the tile and glass solution.

As is known in the laser industry, laser beams do not engrave different colors. However, after engraving, you can choose to fill the engraved spaces with Filling Colors to make the end product more colorful.

Due to the very low thickness of 0.2 mm, Laser Foil is perfect for convex applications. It is available in different colors with a self-adhesive backside. These features make Laser Foil a material used in many laser related applications. Furthermore, Laser Foil is easy to engrave and cut by laser and has excellent engraving and cutting quality.

Format:

610 x 305 mm

Thickness:

0.2 mm

Engraving depth:

0.05 mm

The Multimat is an effective holding mat to secure your small items while engraving and cutting. This product is perfect for thin films, plastic, metal, cardboard, paper, or any material which could be sucked out by the exhaust. After laser cutting, materials stay put due to the natural stickiness of the special plastic of the mat. The Multimat is safe for laser cutting with no harmful out gassing. It is reusable and after removing the small cut pieces of substrate, the mat can be cleaned with warm water.

Format:

1220 x 610 mm

610 x 610 mm

Thickness:

1.5 mm

Due to the very thin surface of Engravemat it is possible to make a non-cutting engraving of fine textures and words without shadow effect. The surface is matt and free of reflections.

Format:

1220 x 610 mm

610 x 610 mm 

Thickness:

0.8 mm

1.5 mm

2.5 mm

Engraving depth:

0.05 mm

Especially made for laser engraving and laser cutting. It can be cut into pieces with very fine outlines like letters or logos.

Format:

1220 x 610 mm

610 x 610 mm

Thickness:

0.4 mm

0.6 mm

1.5 mm

Engraving depth:

0.05 mm

Reverse acrylic sheets are suitable for back light and back color applications. It can be engraved by laser machines and mechanical routers. 

Format:

1000x 610 mm

500x 610 mm

Thickness:

1.5 mm

Engraving depth:

0.05 mm

The unique no smell laser rubber is intended to make work easier and more pleasant. This kind of rubber doesn’t emit any smell while it is being engraved and yet, the engraving quality is great. Working with this rubber will cause no nuisance for laser operators or neighbors!

Format:

A4

A3

Thickness:

2.3 mm

Other thicknesses available on request

Over a span of ten years standard laser rubber has won the trust and approval of worldwide users. This rubber can be engraved and cut with any type of CO2 laser, is suitable for any type of stamp mounts, and good for single color and multi color stamps. The Standard Laser Rubber is good whenever there is no need to use the odorless rubber. 

Format:

A4

A3

Thickness:

2.3 mm

Other thicknesses available on request

Over a span of ten years standard laser rubber has won the trust and approval of worldwide users.

This rubber can be engraved and cut with any type of CO2 laser, is suitable for any type of stamp mounts, and good for single color and multi color stamps.

The Standard Laser Rubber is good whenever there is no need to use the odorless rubber.