Systems PCB technologies

This high performance multilayer press was designed for PCB labs to enable quick prototyping of multilayer PCBs according to industry standards. HNumber of layers is only limited by the maximum lift of the press plates (38 mm). Using separating metal sheets one can press a couple of boards over each other at the same time. A compact and floor standing aluminium rack contains all parts of the unit including pressure supply, press plates and heaters. The large loading door allows quick and easy access to the press chamber and is of course security switch protected. A compressor, which is integral part of RMP 210 / RMP 3545 is stored in the back of the machine.In the front, you will find additional storage room for tools or boards (lower door). The unit is controlled by two digital and adjustable thermostates, one digital timer as well as a pressure valve with pressure meter. Four strong air ventilators are activated automatically during cooling cycle.

RMP 210 Technical Specifications 

• Board size: brutto: 250 x 350 mm, netto: 210 x 300 mm
• Pressure: > 12 t
• Temperature: up to 250°C free adjustabler (max 300°C as an option)
• Heating up: approx.30 min.
• Pressure time: approx. 60 min.
• Cooling down: approx. 120 min.
• Weight: approx. 130 kg
• Power supply: 230 V~, 50 Hz, 16 A
• Dimensions (BxWxH): 650 x 650 x 1390 mm

RMP 3545 Technical Specifications

• Board size: brutto: 350 x 450 mm, netto: 300 x 400 mm
• Pressure: > 24 t
• Temperature: up to 250°C free adjustabler (max 300°C as an option)
• Heating up: approx.30 min.
• Pressure time: approx. 60 min.
• Cooling down: approx. 120 min.
• Weight: approx. 260 kg
• Power supply: 400 V~, 50 Hz, 32 A
• Dimensions (BxWxH): 830x870x1600 mm

Features

Steps of multilayer production:

• Boards are pinned and stack is inserted into press plates.
• Pressure is created.
• Heater is activated.
• Heating up procedure.
• Press procedure at preset temperature.
• Cooling down under pressure.
• PCB stack is taken out of the machine.

The next generation of our successful RMP 210/3545 series has now a Facelifting. The new RMP touch system is now available upon request With its built-in controller and touch Display, that will automize the production process of your multilayer press workflow. Of course, optional vacuum is still available.

• Board size: netto: 210 x 300 mm
• Pressure: > 12 t
• Weight: approx. 130 kg
• Power supply: 230 V~, 50 Hz, 16 A
• Dimensions (BxWxH): 650 x 650 x 1390 mm

RMP 3545 Touch technical specifications

• Board size: netto: 300 x 400 mm
• Pressure: > 24 t
• Weight: approx. 260 kg
• Power supply: 400 V~, 50 Hz, 32 A
• Dimensions (BxWxH): 830 x 870 x 1600 mm