Customer Service
-
- AR
- /
- EN
-
The Bungard CCD/MTC is a high quality Computer Controlled Drilling and milling machine with semi-automatic tool change (MTC = manual tool change). The CCD/MTC XL differs from the CCD/MTC by a larger working area (500x600 mm in contrast to 325x495 mm).Compared to the ATC models, the software interrupts the operation during the tool change and the new tool is changed manually (turning the knob changes by a quarter turn; motors remaine empowered and hold the position). With the sturdy spindle and the good fi xation of the tool in the chuck the Bungard CCD/MTC XL is perfectly fi tted for routing or engraving plastics, aluminium and other metals. 19 inch rack boards can also be processed. The MTC/XL is ideal for extremely large boards and special applications.
The SprintDryer can be connected in any way to any type of sprint, with a suitable dryer available for each throughput width of the Sprint series. Of course, you can also use the SprintDryer together with the DL500 or as a stand-alone-unit with or without an underframe and with or without an inlet or outlet table. First the wet board is pre-dryed in two squeeze zones. After that the board is completely dried in a hot-air stream. The cross flow fan with integrated heating element generates uniform laminar airflow across the whole working width. The board runs automatically through the drying zones of the SprintDryer. The speed of the roller drive is continuously adjustable in a wide range. Special beard roller assures a uniform transport of the PCB through the machine. The construction of the rollers allows drying boards with different thicknesses. Features
The universal oven is our classic appliance for temperature control in science, research and material tests in industry. This machine is a perfect masterpiece in terms of technology and is made of high-quality, hygienic, easy-to-clean stainless steel. In regard of ventilation and control technology, overtemperature protection and precisely tuned heating technology all possible aims are perfectly fulfilled.
The Bungard CCD/2-Eco completes the Bungard CNC segment for the low price level. The machine is especially interesting for beginners with a low budget, because it has on the one hand an unbeatable price, but on the other hand offers the same mechanic quality and precision of all other Bungard CNC machines. Unlike all other CCDs, this machine is equipped with a low-cost eco-spindle which allows speeds from 5000 up to 35000 U / min. For normal everyday work such as isolation milling and contour milling of printed circuit boards, this spindle is highly sufficient. For aluminum and non-ferrous metals however not. Of course the machine can be upgraded at any time thereafter with a high-speed spindle. The CCD/2-Eco is a high quality Computer Controlled Drilling machine with semi-automatic tool change. It allows direct processing of Excellon / Sieb & Meyer drill data or HP-/ GL data for the production of printed circuit boards (drilling, milling, isolation routing) and milling/engraving of plastics. In addition to the spindle the Bungard CCD/2-Eco can be upgraded with a dispensing device for solder paste or glue, a laser exposure head for exposing photoresists and a camera for calibration and inspection tasks.
This high performance multilayer press was designed for PCB labs to enable quick prototyping of multilayer PCBs according to industry standards. HNumber of layers is only limited by the maximum lift of the press plates (38 mm). Using separating metal sheets one can press a couple of boards over each other at the same time. A compact and floor standing aluminium rack contains all parts of the unit including pressure supply, press plates and heaters. The large loading door allows quick and easy access to the press chamber and is of course security switch protected. A compressor, which is integral part of RMP 210 / RMP 3545 is stored in the back of the machine.In the front, you will find additional storage room for tools or boards (lower door). The unit is controlled by two digital and adjustable thermostates, one digital timer as well as a pressure valve with pressure meter. Four strong air ventilators are activated automatically during cooling cycle.
Steps of multilayer production:
The name IONEX stands for ION-EXchanger, which is the very heart of this modern waste water treatment system. The Ionex is a modern and compact plant to treat rinsing water coming form the etching or through-hole-plating machines of a pcb laboratory. We offer 4 basic variants, which differ in rinsing water through-put and ion capacity. Type A and B are equipped with a cotton pre-filter, two cation columns and a ph neutralization column. Type KA and KB have three ion exchange columns. The cation columns color red, when loaded with ferric ions and blue/green, when loaded with copper ions. Loading of anion column can be testet by measuring the conductance of the cleaned water. Loaded columns can be sent to Bungard for regeneration or we support you to do the regeneration yourself. The drain water quality from this system is in accordance to German directives, which are of the highest standards world wide!
An international trendsetter on the world market for printed circuit board production is the Bungard CCD PREMIUM. It combines all available highlights, required in a modern PCB lab, to a fully equipped CNC center.
The next generation of our successful RMP 210/3545 series has now a Facelifting. The new RMP touch system is now available upon request With its built-in controller and touch Display, that will automize the production process of your multilayer press workflow. Of course, optional vacuum is still available.
