Customer Service
-
- AR
- /
- EN
-
The Bungard CCD/2-Eco completes the Bungard CNC segment for the low price level. The machine is especially interesting for beginners with a low budget, because it has on the one hand an unbeatable price, but on the other hand offers the same mechanic quality and precision of all other Bungard CNC machines. Unlike all other CCDs, this machine is equipped with a low-cost eco-spindle which allows speeds from 5000 up to 35000 U / min. For normal everyday work such as isolation milling and contour milling of printed circuit boards, this spindle is highly sufficient. For aluminum and non-ferrous metals however not. Of course the machine can be upgraded at any time thereafter with a high-speed spindle. The CCD/2-Eco is a high quality Computer Controlled Drilling machine with semi-automatic tool change. It allows direct processing of Excellon / Sieb & Meyer drill data or HP-/ GL data for the production of printed circuit boards (drilling, milling, isolation routing) and milling/engraving of plastics. In addition to the spindle the Bungard CCD/2-Eco can be upgraded with a dispensing device for solder paste or glue, a laser exposure head for exposing photoresists and a camera for calibration and inspection tasks.
The Bungard CCD/2/ATC Precision is a high quality Computer Controlled Drilling machine with automatic tool change. The CCD/2/ATC Precision differs from the CCD/2/ ATCby higher step resolution at almost same drive speed as well as by two additional softare packages under ROUTEPRO 3000: Calibrate 3000 (incl. camera, not shown on the picture here) and PLUS 3000 The CCD/2/ATC Precision is ideal for users, who do not have enough space to run an CCD/Premium machine. Technical details
The SprintDryer can be connected in any way to any type of sprint, with a suitable dryer available for each throughput width of the Sprint series. Of course, you can also use the SprintDryer together with the DL500 or as a stand-alone-unit with or without an underframe and with or without an inlet or outlet table. First the wet board is pre-dryed in two squeeze zones. After that the board is completely dried in a hot-air stream. The cross flow fan with integrated heating element generates uniform laminar airflow across the whole working width. The board runs automatically through the drying zones of the SprintDryer. The speed of the roller drive is continuously adjustable in a wide range. Special beard roller assures a uniform transport of the PCB through the machine. The construction of the rollers allows drying boards with different thicknesses. Features
The Bungard CCD/2/MTC is a high quality Computer Controlled Drilling machine with semi-automatic tool change. In contrast to the CCD/MTC the CCD/2 has a half sized work area (325 x 270 compared to 325 x 495mm) and an integrated control unit underneath the table. Compared to the ATC models, the software interrupts the operation during the tool change and the new tool is changed manually (turning the knob changes by a quarter turn; motors remain empowered and hold the position). The CCD/2 has the same robustness and precision as all the other CCD models. It is ideal as an entry-level model for isolation milling. If you want to operate the CCD/2 with cooling, you need to protect the control unit from the cooling. Please contact us beforehand. In contrast to all other CCD models, the machine zero point is at the front left. The X axis is the traverse over the table, whereas the Y-axis is located on table level. The CCD/2 can not be converted to automatic tool change. If you possibly want to upgrade at a later time, please contact us before purchase. If necessary we can create a special version for you.
The universal oven is our classic appliance for temperature control in science, research and material tests in industry. This machine is a perfect masterpiece in terms of technology and is made of high-quality, hygienic, easy-to-clean stainless steel. In regard of ventilation and control technology, overtemperature protection and precisely tuned heating technology all possible aims are perfectly fulfilled.
The Bungard CCD/2/ATC is a high quality Computer Controlled Drilling machine with automatic tool change. The CCD/2/ATC differs from the CCD/ ATC by a half sized working area (325 x 270 mm). The CCD/2/ATC is ideal for users, who do not have enough space to run an ATC machine.
An international trendsetter on the world market for printed circuit board production is the Bungard CCD PREMIUM. It combines all available highlights, required in a modern PCB lab, to a fully equipped CNC center.
This high performance multilayer press was designed for PCB labs to enable quick prototyping of multilayer PCBs according to industry standards. HNumber of layers is only limited by the maximum lift of the press plates (38 mm). Using separating metal sheets one can press a couple of boards over each other at the same time. A compact and floor standing aluminium rack contains all parts of the unit including pressure supply, press plates and heaters. The large loading door allows quick and easy access to the press chamber and is of course security switch protected. A compressor, which is integral part of RMP 210 / RMP 3545 is stored in the back of the machine.In the front, you will find additional storage room for tools or boards (lower door). The unit is controlled by two digital and adjustable thermostates, one digital timer as well as a pressure valve with pressure meter. Four strong air ventilators are activated automatically during cooling cycle.
Steps of multilayer production:
The name IONEX stands for ION-EXchanger, which is the very heart of this modern waste water treatment system. The Ionex is a modern and compact plant to treat rinsing water coming form the etching or through-hole-plating machines of a pcb laboratory. We offer 4 basic variants, which differ in rinsing water through-put and ion capacity. Type A and B are equipped with a cotton pre-filter, two cation columns and a ph neutralization column. Type KA and KB have three ion exchange columns. The cation columns color red, when loaded with ferric ions and blue/green, when loaded with copper ions. Loading of anion column can be testet by measuring the conductance of the cleaned water. Loaded columns can be sent to Bungard for regeneration or we support you to do the regeneration yourself. The drain water quality from this system is in accordance to German directives, which are of the highest standards world wide!
